User's Manual

User’s Manual to XCRF-502E Reader
Internal use.only. Any transmission is not
allowed without permission.
30
5.5.4 Write Distance
It is usually performed after the test of read tag, with the test of
write single tag from the distant to the near.
5.6 Test of Read Tag Information
It can be performed through the “XCRF-502E Demo”.
5.7 Test of Write Tag Information
It can be performed through the “XCRF-502E Demo”.
5.8 Common Faults in Commissioning
The common faults in commissioning are described in detail in
this section, especially the general faults resulted from incorrect or
inaccurate installation, and the solutions.
The common faults in commissioning are as follows:
z The Reader has no response
☆ Indicator lamps off → check the power supply;
☆ The indicator lamp for power supply is on → check related
cable connections, and check corresponding items by the relevant
indicator lamps’ status;
☆ In network port communication status → check whether the
connected IP is correct; and check whether any collision to the IP
address;