User's Manual

User’s Manual to XCRF-502E Reader
Internal use.only. Any transmission is not
allowed without permission.
39
7 Routine Maintenance and Repair
7.1 Routine Maintenance
Follow the requirements on storage.
7.2 Common Faults and Troubleshooting
The solutions to the abnormal situations during using XCRF-502
E reader are mainly introduced here.
z “POWER” indicator lamp on the front panel is off when the
Power is on
☆ Fault in the power supply system: Check whether the AC
power supply is OK, and whether the AC power voltage is in the range
of 100V to 240V;
☆ If other indicator lamps are on, a failure happens to the DSP
inside; users must contact Invengo for repair if a failure in DSP occurs;
z Network port connection failure
z ☆ The default IP address is 192.168.0.210. If the PC’s IP
address and the Reader's IP address (e.g. ) are of one segment network,
the connection between the Reader and PC can be established. If the
Reader’s IP address is forgotten, reset the Reader’s IP address on the
PC with RS-232 serial port.
z Network port connection failure