User's Manual
Manuals
Brands
INVENGO Manuals
Electronics
Reader
31
32
33
34
35
36
37
38
39
40
Table Of Contents
1. Instructions Before Use
2. Product Overview
2.1 Product Features
2.2 Main Application and Scope of Application
2.3 Applicable Regions and Frequency Points
2.4 Environmental Conditions
2.5 Power Supply Mode
2.6 Safety and Protective Measures
3.Introduction to Reader
3.1 Instructions for Unpacking
3.2 Interface Description
3.3 Description of LED Panel
3.4 External Dimensions
3.5 Weight
4.Installation of Reader
4.1 Installation Conditions
4.2 Installation Steps
4.2.1 Select a Position for Fixing the Reader
4.2.2 How to Fix the Reader
4.2.3 Connect Antenna to Reader
5.Reader Debugging
5.1 Preparation for Debugging
5.1.1 Personal Computer
5.1.2 Reader Software
5.1.3 External Antenna
5.1.4 External RF Cable
5.2 Power Supply of Reader
5.3 Network Connection of Reader
5.3.1 Network Connection (Linux System)
6.Reader Operation
6.1 Instructions for Use of Web GUI
6.1.1 Web Login
6.1.2 Web Operations
7.Technical Parameters of Reader
7.1 Performance Parameters
7.1.1 Hardware and Operating System
7.1.2 RFID Parameters
7.1.3 Mechanical and Environmental Parameters
7.2 Main Functions
7.2.1 Communication Function Interfaces
7.2.2 Other Functions
8.Daily Maintenance and Repair
8.1 Daily Maintenance
8.2 Common Fault Analysis and Solutions
1. Panel “status” indicator lamp is not on
2. The network port cannot be connected
3. The reader could not read the tag
4. The tag reading range of the reader is close
5. Slow tag reading speed or poor multi-tag performance
8.3 Maintenance during Long-term Storage
9.After-sales
9.1 After-sales Services
9.2 Other Notes
FCC Warning
RF exposure statement
36
3) Wir
eless
hotspot
1
...
...
34
35
36
37
38
...
...
52
