User Manual

Page 16 of 33
z Enter the number in idle and pick up the handset or press the Handfree key or press
the Send key. The number is dialed.
z When enter the number, press Right soft key （clear）to erase the number, press
Left soft key （save） to save it to the phonebook, and press End key return to idle.
3 No matter whether the handset is picked up or the Handfree key is pressed, press
Send key in idle to enter the dialed call list.
When the number is dialed, put down the handset or press the Handfree key or press the
End key to cancel the dialing operation.
3.1.2 Inserting a pause sign when dialing
You can use the pause sign to dial an extension number automatically or manually.
In an automatic way
1. Enter the phone number.
2. Press * key continuously three times to insert a “P”.
3. Enter the extension number.
4. Dial the number before “P”. After the line is connected, the phone will dial the number
after “P” automatically.
Notice: The suspending time depends on the number of the “P” you entered.
In a manual way
1. Enter the phone number.
2. Press * key continuously four times to insert a “W”.
3. Enter the extension number.
4. Dial the number before “W”. After the line is connected, the phone will ask you
whether to dial the number after “W”.
3.1.3 Speed dialing
After you have activated the Speed Dial function and assigned the phone number to the
relevant numeric key, you can press and hold the key to call the number quickly in idle.
3.1.4 Redialing
In idle you press the Redial key display “No support”.
3.2 Answering/rejecting a call
When you selecte Don’t Allowed in CM Settings can not answer a call.
When you select Allow With PIN in CM Settings there is an incoming call, you must enter
CM PIN then you can answer the call.
When you select Always Allow in CM Settings there is an incoming call:
1. Pick up the handset or press the Handfree key or press the Send key to answer a
call. If the handset has been picked up or the Handfree key has been pressed, you
can just press the Send key to answer the call.
2. Press End key or Right soft key (Reject) to reject it.