User's Manual
IMPORTANT: If the download begins but doesn’t progress past 0%
in 5 minutes, there may be a problem with the Pandigital server.
Please contact customer support through the website: www.
pandigital.net/support.
5. If the download fails, tap
Retry.
If the download was successful, tap
Next to begin the update
process. The device automatically restarts, begins the fi rmware
update process, and when complete the device restarts again.
6. If you tapped
Exit in step 4, follow these steps to manually start the
update process at any other time:
a) Turn the device off.
b) IF applicable, insert the SD card onto which you downloaded the
fi rmware.
c) Press the Volume + key and power bu on simultaneously for 3
seconds.
d) Release both buttons to start the fi rmware update process.
e) When complete the device automatically restarts.
Revert back to Previous Firmware Version
When you perform a fi rmware update, the update fi le is saved to the
internal storage or your SD card. If you perform another fi rmware
update, the existing update fi le will be moved into an \old fi rmware
folder before the new update fi le is downloaded.
After performing the new fi rmware update, if desired at a later time, you
can revert back to the previous version by following these steps:
1. Connect the device to your computer tap Turn on USB storage.
2. In a Windows Explorer or Mac Finders window, locate and delete
the fi rmware update fi le in the root of the internal storage or SD
card (i.e., IR80_[letters]_[most recent date].zip).
3. Move the previous fi rmware update fi le from the \old fi rmware
folder to the root of the internal storage or SD card (i.e., PR70_
[letters]_[older date].zip).
4. Turn the device off.
5. Press the
Volume + key and power bu on simultaneously for 3
seconds.
6. Release both buttons to start the fi rmware update process.