User's Manual

76
3. Select the device with which you want to create a Bluetooth partnership, then select
Next. If the device you are looking for does not appear in the list, ensure that it
is in range and that it has been made discoverable, then select Refresh.
4. In Passcode, enter an alphanumeric passcode between 1 and 16 characters,
then select Next. Otherwise, leave the passcode blank. For security reasons, it is
strongly recommended that you use a passcode.
5. Enter the same passcode on the other device (there will be a prompt to do so).
6. Select the service to use from the partner device, then select Finish. One of the
most common examples of this is to choose the Microsoft ActiveSync service
from the list of your PC’s available Bluetooth services.
Receiving a File
Before receiving les, you must allow incoming beams. Select Start > Settings >
Connections tab > Beam, then enable the Receive all incoming beams option.
To receive beamed information, the device must rst be made discoverable.
1. Select Start > Settings > Connections tab > Bluetooth,
then select the Mode tab.
2. Select Make this device visible to other devices.
3. On your PC (or other Bluetooth-enabled devices), locate the le or item you want
to send. For example, on your PC, you would use Windows Explorer to locate
the le.
4. In the example above, right-click the le and select the destination device under
“to Bluetooth”.
5. Select Yes when the device prompts about receiving a le.
6. After the transmission process is nished, the le should be saved in My
Documents on the device.