User's Manual
85
Editing a Prole
1. Select Start > Programs > Phone Prole.
2. Select a prole and then select Edit.
3. Select your preferred sound options for calls and messaging.
4. Select the Advance tab to set dial pad sound or auto-answering function.
5. Select OK to apply the changes.
Restoring a Prole
1. Select Start > Programs > Phone Prole.
2. Do either of the following:
• Select the prole that you want to restore to default,
select Menu > Restore Selected.
• Select Menu > Restore All to restore all proles to default.
3. Select OK.
Using Audio Files as Ring Tones
You can use your own audio les as a ring tone. Open File Explorer, select and hold the
le, then select the Set As Ringtone command.
9.6 GPS
A GPS (Global Positioning System) signal receiver is built in the device. You have to
install a mapping software on the device to start navigating. Please follow the instruction
of your mapping software to install it and use the navigation functions. You may need
to specify the GPS hardware port when installing the mapping software. Select the
following value if requested.
• GPS hardware port: COM9.
• Baud rate: 9600.
NOTE: Your device is equipped with AGPS (Assisted GPS), please consult with your service
provider to see if this function is supported.
Using AGPS may be charged extra fee by your service provider.