H-19 Series Manual
Contents Chapter 1. Knowing Your Device 1.1 1.2 1.3 1.4 1.5 Introduction Accessories Installing SIM Card and Battery Battery Information Mini-SD Cards Chapter 2. Basic Operations 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Getting Started Input Methods Today Screen Components The Start Menu Using Calendar Using Notes Using Tasks Charter 3. Phone Features 3.1 3.2 3.3 3.4 3.
Chapter 4. Synchronizing Information 4.1 4.2 4.3 4.4 4.5 Installing and setting up ActiveSync Synchronizing Information Changing Settings for an Information Type Synchronizing with Exchange Server Synchronizing via Bluetooth 88 90 91 93 93 94 Chapter 5. Bluetooth Connections 95 5.1 Bluetooth Modes 5.2 Bluetooth Partnership (Bonding) 5.3 Beaming Information (Bluetooth) 96 98 100 Chapter 6. Transferring Files To and From Your Device 6.1 6.2 6.3 6.
Chapter 8. Messaging & Contacts 8.1 8.2 8.3 8.4 Text Messaging Multimedia Messaging Service E-mail Using Contacts Chapter 9. Using Barcode Reader 9.1 Setting Barcode Reader 9.2 Scanning and Reading Barcode labels Chapter 10. Other Applications 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.
CAUTION : This information is subject to change without prior notice. Copyright©2010 Opticon. All Rights Reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase.
•The device is not charged when you take it out of the box. The battery should be charged for at least 8 hours before first use. Do not remove the battery while charging. • Do not use batteries which have not been specified by the manufacturer and qualified with the system per the standard of IEEE-Std-1725-2006, as this may present a risk of fire, explosion, leakage or other hazard. • Do not charge the battery with an unspecified AC Adapter, as this may cause damage to both the device and the battery.
• Use hands-free devices if you need to use the telephony services while driving a vehicle. Observe local guidelines. • Do not disassemble or open crunch, bend or deform, puncture or shred the battery. • Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. • Only use the battery for the system for which it is specified.
Safety of Laser Products International Standards Laser Class 2 Precautions about the Laser Device This product using laser complies with JIS C6802: 2005 Class 2, IEC60825-1+A2: 2001 Class 2 and 21CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.50, dated June 24, 2007. Class 2 Laser devices are not considered to be hazardous when used for their intended purpose. Use of controls, adjustment of procedures other than those specified herein may result in hazardous laser light exposure.
Chapter 1. Knowing Your Device 1.1 Introduction 1.2 Accessories 1.3 Installing SIM Card and Battery 1.4 Battery Information 1.
Chapter 1. Knowing Your Device 1.
1 Stylus Write, draw, or make selections on the touch screen. 2 Scan key (left) Press the key to scan and decode bar code/2D code. 3 Record key Press and hold this key to record a voice note. 4 Volume up Press the Volume up button to turn up the PDA receiver volume. 5 Volume down Press the Volume down button to turn down the PDA receiver volume. 6 Reset button* Press the Reset button with stylus to soft-reset your device.
Chapter 1. Knowing Your Device 18 End key End a call or close Phone application. 19 5-way navigation key Press the multi directional control up, down, left, or right to move 20 Numeric keypad Enter numbers or letters by the numeric keypad. 21 Connect pins 22 Microphone Connect the connect pins of the device and the cradle (if any) for recharging the battery. Speak into the microphone when talking on the device or recording a voice note.
Clean boot Your Device You can execute a system cold boot to format both user store and DiskOnChip on your device. To prompt the instruction for cold boot, press the Reset button, and then press and hold the Power button immediately until the cold boot screen appears. You can then choose one of the following steps: • Pressing the left key of the 5-way navigation key to format user store. • Pressing the right key of the 5-way navigation key to format DiskOnChip.
Chapter 1. Knowing Your Device GSM/Battery LED lets you know that you have unanswered calls or tells you about the device’s GSM/battery status: Color Missed Call/ Low Power GSM on (battery full) GSM on (battery low) Charging Red Blink Off Blink Off Orange Off Off Off Constantly on Green Off Blink Off Off 1.
1 2 3 4 5 6 AC adapter Stereo headset USB cable Getting started CD User manual/Quick guide Pouch 7 Neck strap 8 Belt clip 9 Battery 10 Strap set 11 12 13 14 15 UK plug EU plug AU plug Stylus Additional stylus 16 Stylus holder 17 Stylus string Recharge the device battery. Listen to a phone conversation hands-free. Connect the device to a PC. Windows MobileTM Getting Started Disc. Provide instructions of device functions. Protect the device.
Chapter 1. Knowing Your Device 1.3 Installing SIM Card and Battery Removing the Battery Cover and Installing the SIM Card If you want to use phone features, you must install a valid SIM card. 1. Press the battery cover downward and slide one of the cover latches down at the same time. 2. Repeat the same steps to unlock another cover latch. 3. Lift the battery cover as the diagram shown below.
Installing the Battery and the Battery Cover 1. Press the battery down forcefully into the battery slot. 2 1 2. Angle the battery cover as shown in the diagram and close the battery cover. 3. Press the battery cover downward and slide one of the cover latches up at the same time. 4. Repeat the same steps to lock another latch. Lock the s s Pre Lock the latch latch Please avoid placing the battery as the direction shown in the figure.
Chapter 1. Knowing Your Device Replacing the Battery to Keep Your Unsaved Data: When the main battery is low, you can quickly replace the battery by doing the following: 1. Before replacing the main battery, hold the Fn key and press Power button at the same time for 3 seconds. 2. A message box pops up on the screen, asking for confirmation to turn the device into backup mode. Select "OK". (If select "Cancel", the device will go back to normal.) 3. A few seconds later, the screen backlight goes off.
1.4 Battery Information Battery performance depends on many factors, including your wireless service provider’s network configuration, signal strength, the temperature of the environment in which you operate your device, the features and/or settings you select and use, items attached to your device’s connecting ports, and your voice, data, and other program usage patterns.
Chapter 1. Knowing Your Device The backup battery powers a real-time clock (RTC) which keeps track of the time even when your device is turned off. When the backup battery power is normal or full, it can keep accurate real time for five minutes even if the main battery is removed and for up to 168 hours while the main battery is low. The device contains a rechargeable Li-ion polymer battery completely discharged and should be charged for at least 8 hours before first use.
Managing a Low Battery When the low-battery warning appears, tap OK or Dismiss to close the warning and do the following: • Start charging or replace your battery. • Turn off any unnecessary wireless module or turn off the device. Charging the Battery 1. To charge the battery, place the battery into the battery slot correctly. See previous section for how to install the battery. 2. Do one of the following: • Connect the device with the AC adapter and plug the AC adapter into a power outlet.
Chapter 1. Knowing Your Device 1.5 Mini-SD Cards Mini-SD is one of the most popular formats for mobile devices. Your device contains a mini-SD card slot in which you can expand the device’s memory up to 2GB. Mini-SD provides functions such as built-in security for copyrighted content along with great performance for storing music, video, and photographs. Please note that mini HCSD (High Capacity SD) is not supported by this device.
Chapter 2. Basic Operations 2.1 Getting Started 2.2 Input Methods 2.3 Today Screen Components 2.4 The Start Menu 2.5 Using Calendar 2.6 Using Notes 2.
Chapter 2. Basic Operations 2.1 Getting Started Powering On/Off the Device Press the POWER button to turn on the device. The POWER button is located on the top of the front side of the device. When you power on the device for the first time, you are asked to calibrate the device. Please refer to the “Calibrating your device” section in this chapter for calibration steps. Press the POWER button again to switch the device to sleep mode.
1. Tap > Settings > System tab > Screen. 2. Tap the Align Screen button and follow the on-screen instructions. Locking/Unlocking the Device Locking the device turns off keyboard and touch screen functionality. This is a helpful feature if, for example, the device is turned on and in your pocket, and you want to prevent accidental key presses. • To lock the device, tap on the icon on the Today Screen. Once the device is locked, the left soft key label changes to Unlock.
Chapter 2. Basic Operations You can still receive calls and make emergency calls when the keypad is locked. To unlock the device, tap the Unlock button on the Today screen first, a screen as below will show. Press * to unlock the device, or tap the Unlock button on the screen. You can lock/unlock the device by p r e s s i n g t h e F n k e y a n d Re c o r d key, refer to chapter 2.2 for more information.
Setting Buttons To change functions for specific buttons in your device: > Settings > Buttons > Program Buttons tab. Select a button (Button 1, Button 2 • Tap or Button 3) and assign a new program to replace the default one. • Button 1: Record button. • Button 2: Fn + . . • Button 3: Fn + To change Up/Down control and repeat rate: > Settings > Buttons > Up/Down Control tab. Drag the slider on the screen to • Tap customize the way your Up/Down control repeats.
Chapter 2. Basic Operations 2.2 Input Methods The device contains 7 different input modes: Keyboard, Letter Recognizer, Block Recognizer, Transcriber, Initial capital, Lowercase and Uppercase. You can enter texts and numbers by using the keypad or the touch screen. Icon Input Modes Keyboard Letter/Block Recognizer Transcriber Initial capital Lowercase Uppercase Using the Touch Screen Keyboard to launch the on-screen keyboard.
• Tap the CAP key on the on-screen keyboard to enter capital letters and/or symbols. Letter Recognizer Letter Recognizer recognizes one letter, number, or symbol at a time. • To launch Letter Recognizer, tap the input method selector arrow (the upward arrow next to the input method icon) and select Letter Recognizer. • Write uppercase letters in the left recognition area (the ABC box). • Write lowercase letters in the middle recognition area (the abc box).
Chapter 2. Basic Operations Tap in Letter or Block Recognizer to see a demo on how to write recognizable characters. Transcriber Transcriber recognizes handwritings in cursive and/or print. It uses the full screen as its recognition area. It interprets the movement of the stylus on the screen as you write. • To launch Transcriber, tap the input method selector arrow (the upward arrow next to the input method icon) and select Transcriber. • Write anywhere on the screen.
Initial capital To capitalize the first letter of every sentence you enter by using the keypad, do the following: • Tap the input method selector arrow (the upward arrow next to the input method icon) and select Initial capital. You can see the input icon is changed to . Lowercase To enter lowercase letters constantly by using the keypad, do the following: • Tap the input method selector arrow (the upward arrow next to the input method icon) and . select Lowercase.
Chapter 2. Basic Operations Corresponding letters/numbers/symbols for each numeric key: Numeric keys Input mode Lowercase mode Initial capital mode Uppercase mode 1 2 abc2 ABC2 ABC2 3 def3 DEF3 DEF3 4 ghi4 GHI4 GHI4 5 jkl5 JKL5 JKL5 6 mno6 MNO6 MNO6 7 pqrs7 PQRS7 PQRS7 8 tuv8 TUV8 TUV8 9 * 0 # wxyz9 WXZY9 WXZY9 .,?! '@`-_():;&/\%#*1 Caps lock / Shift +0 Space Tips of Using the Function Key The Fn key helps you to execute certain actions quickly such as input mode switc
• Fn + 3: switch to Initial capital mode. • Fn + 4: switch to Uppercase mode. • Fn + Action key (the central button of the 5-way navigation key): perform Enter. • Fn + * ( ): this is set to open Start menu by default (Programable Button 2). Refer to chapter 2.1 if you want to change it. • Fn + # ( ): this is set to perform OK/Close by default (Programable Button 3). Refer to chapter 2.1 if you want to change it. • Fn + Record key (on the left side of your device): lock/unlock the device.
Chapter 2.
2.3 Today Screen Components Today Screen The Today Screen is usually the first screen that appears when you turn on the device for the first time each day. It displays a summary of information for the day, shows you the system status and contains a list of shortcuts to programs.
Chapter 2. Basic Operations Icon Indicators Status indicators appear at the top of the screen and on the Today screen. The following table lists common status indicators and their meanings.
2.4 The Start Menu The Start menu is divided into 3 groups as described in the following: 1 1 2 3 2 Commonly used items Recently accessed applications List of all programs, device settings, and system help 3 List of All Programs The following table lists icons of the programs that are already installed on your device. Games Windows Mobile comes with 2 games: Bubble Breaker and Solitaire. ActiveSync Synchronizes information between your device and a PC. See “Chapter 4.
Chapter 2. Basic Operations 38 FormatDisk Lets you format an inserted mini-SD card and DiskOnChip in your device Getting Started Brief introductions and shortcuts of commonly used items. Internet Sharing Lets you use your device as an external modem for a PC, connecting through an USB port and Bluetooth. Live Search Access Windows Live Search. Messenger Lets you send and receive instant messages with your Windows Live Messenger contacts. Notes See “2.6 Notes” for details.
List of All Settings Personal Buttons Configures the device’s buttons. Input Input method configurations. Lock Set a password to unlock the device. Menus Configure the Start menu. Owner Information Enter information about the owner of the device. Phone Configure the Phone features. See “Chapter 3 Phone Features” for details. Sounds & Notifications Configure program and event sounds. Today Configure the Today screen items and theme. System About Windows Mobile information and device name.
Chapter 2. Basic Operations 40 Device Info Display the device software and hardware version. Encryption Encrypt files placed on storage cards. Error Reporting Enable or disable Microsoft product error reporting. External GPS Helps you to set up an external GPS device on your device Factory Reset Lets you reset all settings to manufacturer default. Managed Programs List programs that have been installed remotely by your system administrator. Memory Memory and process management.
Connections Beam Turn on/off the beam feature. Bluetooth Configure Bluetooth settings. See “Chapter 5 Bluetooth Connections” for detail. Connections Configure the device’s connections. Domain Enroll Allows you to connect the device with company resources. Network Cards Configure Network adapter. USB to PC Enable/Disable advanced network functionality. WAN Conf Helps you to change authentication schemes for GPRS setting (MS-CHAP, CHAP and PAP).
Chapter 2. Basic Operations 2.5 Using Calendar Use Calendar to schedule appointments, including meetings and other events. Your appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can synchronize appointments between your device and PC. You can also set Calendar to remind you of appointments with a sound or flashing light, for example. You can look at your appointments in several different views (Day, Week, Month, Year and Agenda).
2. Tap Menu > New Appointment. 3. Enter information about the appointment. 4. To schedule an all-day event, under All Day, select Yes. 5. To make the appointment recurring, tap on how often it should recur in the Occurs drop-down box.
Chapter 2. Basic Operations 6. Select categories and attendees. Categories: Business,Holiday, Personal, Seasonal. Add attendees to the meeting. 7. Tap Notes tab to add details to the appointment if needed. 8. Tap . All-day events do not occupy blocks of time in Calendar; instead, they appear in banners at the top of the calendar.
Deleting an Appointment 1. Tap > Calendar. 2. In Agenda view, select the appointment to delete. 3. Tap Menu > Delete Appointment. 4. If the appointment is recurring, tap AII to delete the series, or tap One to delete only the current occurrence.
Chapter 2. Basic Operations When you delete an appointment in Calendar on your device, it is also deleted on your PC the next time you synchronize. If the appointment has not been synchronized with a PC, it will be deleted only form the device. Calendar items can be deleted only from Agenda view or from an open calendar appointment. To delete from other views, open the appointment, and Tap Menu > Delete. Changing the Reminder Time By default, the reminder time is set 15 minutes prior to an appointment. 1.
Changing Calendar Views You can look at your appointments in Agenda, Day, Week, Month or Year view. To see detailed appointment information in any view, tap the appointment. To see a list of available actions for an appointment, tap and hold the appointment. > Calendar. 1. Tap 2. Tap Menu > View and select the view you want. View See Agenda Your current day's activities at a glance. Upcoming appointments are bold; past appointments are dimmed. Day Your schedule for a single day in a dayplanner layout.
Chapter 2. Basic Operations View See Week Your schedule for the whole week. Screen Month Your free and booked days for a month: : Current day : morning appointment : afternoon appointment : morning and afternoon appointments : all-day event with time not marked free Year 48 A calendar for the entire year.
In Month view, a date will appear in red when the Holiday category is assigned to any appointment for that day. You can also change the view by tapping Agenda, Day, Week, Month, or Year on the menu bar. To quickly see your appointments for the current day, tap Start > Today. Changing the Display of the Work Week 1. Tap > Calendar. 2. Tap Menu > Tools > Options and do one of the flowing: • To assign a default view, in Start in, select Agenda View, Day View, Week View, Month View or Year View.
Chapter 2. Basic Operations • To specify the first day of the week, in 1st day of week, tap Sunday or Monday. • To specify the number of days you want to appear in a week, in Week view, tap 5-day week, 6-day week, or 7-day week. . 3. Tap Setting Options for Displaying Appointment on the Today Screen You can specify the kind of appointment that show on the Today screen. 1. Tap > Settings > Personal tab > Today > Items tab. 2. Select Calendar, and then tap Options. 50 3.
