Operation Manual

ManualsBrandsInventum ManualsDomesticHK20

The taste selector provides you with the possibility to select and

adjust your individual wateramount/ coffeestrenght. By pressing

the selection button to the left or to the right you can select

your own taste.

Position 1 is strong coffee with a smaller amount of water. Posi-

tion 4 will make thinner coffee with more water. We advice to

place a small mug when you use this selection.

We advise to clean the coffeepadmachine on a regular

bases. Regular cleaning will prolong the life of your

appliance and will guarantee optimal brewing results.

Please do as follows:

Check before cleaning if the coffeepadmachine is

switched off und unplugged. Clean the outside of the

appliance with only a damp cloth and dry it with a

dry cloth. Never use any abrasives! Never place the

appliance in or under running water.

• Remove the drawer 8 by pulling and slightly lifting it

towards you.

This movement unlocks the drawer and

you can take it out of the machine.

• Remove the coffee outlet 7 the same way as the drawer.

To place the coffee outlet and the drawer back, all you

need to do is to place the items correctly on the

sliders. Push the drawer back in the machine. A “click”

indicates that the drawer is placed correctly in the

guides.

• Clean the separate parts: the multi-padholder 13,

the cremamaker

14, the drawer

, the coffee outlet 7,

the grid 5 and the driptray 6 with

warm water and some

washing-up liquid or in the

dishwasher and make sure that

the parts are dry before next use.

• Pay attention to clogging the

small drains in the middle of the

padholder 13 and the outside of the cremamaker 14.

Remove the cremamaker 14 by pushing it out,

from below, with a blunt object like a pen or the back

of a teaspoon. This also concerns the teamaker in the

teapadholder 15.

• Check every day if the driptray 8 is empty and there

are no used coffeepads in the appliance.

If the driptray

is full, it will overow and the liquid will ow under

the appliance.

We advise to descale your coffeepadmachine on a regular

bases. The period depends on the condition of your

water and the frequency of use. We advise to descale the

coffeepadmachine approx. every three months. You can

use a special descalingproduct for coffeemachines.

When you use a descalingproduct especially for

coffeemachines, you will have to follow the instructions

on the package of the descalingproduct accordingly.

CLEANING SEPARATE PARTS

DESCALING

• Switch off the coffeepadmachine with the on/off

button.

• Fill the reservoir according the instructions on the

package of the descalingproduct.

• Place a large mug or bowl under the coffee-outlet to

collect the descalingmixture.

• Open the drawer for the coffeepadholder by pulling the

handle on the side of the drawer outwards gently. The

drawer will now slide open.

• Place a new or used coffeepad in the multi-padholder

with the bulging side down and press it lightly. The

coffeepadmachine will be better descaled when you do

this and it cannot be clogged with descalingbits.

• Slide the drawer gently inwards until it can’t go further.

• Switch the coffeepadmachine on with the -button and

press

directly the 1-cup - button and 2-cups -

button at the same time. Do not let the machine heat

up.

• The coffeepadmachine will now rinse with the

descalingmixture.

• The coffeepadmachine will automatically switch itself

off when the rinsingprocess is ended. Repeat the

process until the waterreservoir is empty. After the

descaling you will have to rinse the machine upto

3 times with 1 liter of fresh cold water to make sure

that there is no descalingproduct left behind in the

coffeepadmachine to avoid a bad taste to the coffee.

Attention! If you haven’t used the coffeepadmachine for

a while, for instance if you have been away on a holiday,

you should remove all the separate parts for cleaning and

rinse the coffeepadmachine with fresh water. Place the

cleaned parts in the machine. This prevents an additional

taste.

When the appliance has a malfunction,

one or two pilot lamps will blink fast.

Check the following steps to solve the

malfunction yourself.

Cause

Waterreservoir is not placed correctly.

Solution

Empty the reservoir, ll it up again to the maximum-

level and place it on the coffeepadmachine.

Cause

Waterlevel is under the minimum, < 1 cup.

Solution

Fill the waterreservoir to the maximumlevel.

Cause

Boiler overheated.

Solution

Switch the appliance off and rinse it as described in

the chapter “To rinse the machine”.

8 | SOLVING A MALFUNCTION

7 | CLEANING & MAINTENANCE

814