User Manual

THE FIITING OF THE APPLIANCE
• Check that the cabinet and the space for the microwave oven meet the dimension and ventilation requirements.
• Read the instructions on the enclosed template for the bottom of the cabinet.
• Tape the template on the bottom of the cabinet. Make sure the centre line on the template is also the centre of the
cabinet.
• Place the bracket on the assigned spot on the template and mount it with the screws. Now pull the template from the
bracket.
• Slide the microwave oven in the cabinet. Note: Make sure the cable is not stuck and does not lie on top of the microwave
oven.
• Open the door of the microwave oven. Use the provided screw to fasten the microwave oven to the cabinet and place
the plastic cap on the screw.
• Close the microwave oven door and plug the appliance in.
• The microwave oven is now ready for use.
Trim-kit plastic cover
Installation Hole
Screw B
a
a
Screw A
Bracket
Centre line
Bracket
Screws
28 • English