Operation Manual

15
• Remove the handle, if it is already fitted, and place it on
the other side of the door. Don’t forget to also refit the
white screw caps.
• Lower the door onto the bottom hinge pin and hold it.
• While holding the door in the closed position, reassemble
the top hinge on the left hand side using the three
screws. Do not tighten the screws until the top of the
door is level with the counter top.
• Refit the top panel using the screws.
• Leave the appliance to stand for at least 3 hours before
you insert the plug into the socket.
8 | REMOVING THE TOP PANEL
To install the refrigerator beneath a counter top for
example, you can easily remove the top panel.
Note: unplug the appliance.
• Remove the screws at the back, holding the top panel to
the appliance.
• Lift the top panel at the backside and remove it.
• Remove the screws on both the frame and the metal
hinge.
• Remove the hinge and the frame.