Operation Manual
ON/MEM
Please ensure that you
never press the SCAN button for longer than 10
seconds during use. Otherwise you will get into a
special measuring mode in which the device does
not longer measure correctly. If you get into this
mode, wait until the device automatically turns
itself off - it will revert to the normal measuring
mode when it is next turned on.
This is
particularly important so that the sensor tip can be pointed
directly at the eardrum.
SCAN
If you repeat the
measurement more often, the results may be imprecise and lower.
Let the device cool down for at least 15 minutes before a further
3 | TAKING THE TEMPERATURE