Operation Manual

VVW6025A DESCRIPTION CHECK
FAULTCODE
Display code
F5
Inadequate water supply. • Check whether the tap is fully open and there nothing blocking the
water mains.
• Close the tap, remove the input hose and check whether it is clogged.
• Start the dishwasher again. Contact the customer service department
of Inventum when the error remains.
F3
Water supply is not stopping. • Close the tap.
• Contact the service department of Inventum.
F2
The waste water can not be discharged. • The water discharge hose is clogged.
• The filters might be clogged.
• Turn the dishwasher off. Reset the dishwasher’s program and check
the filters and the discharge hose.
Restart the dishwasher.
• Contact the customer service department of Inventum when
the error remains.
F8
The water temperature is not correct.
Heating defect.
• Contact the service department of Inventum.
F1
Safety is activated against water
overflow.
• Turn off the dishwasher and close the tap.
• Contact the service department of Inventum.
FE Faulty electronics. • Contact the service department of Inventum.
F7 Overheating error. • Contact the service department of Inventum.
F9
Position of the
distributor error.
• Contact the service department of Inventum.
F6 Faulty heat sensor. • Contact the service department of Inventum.
troubleshooting
8
44 • English