Operation Manual

4 | SETTING THE DISHWASHER

• Switch the dishwasher on by pressing the On/off button (4).

• Select the desired program with the program selector knob (1).

• If you prefer, you can choose an additional function, like prewash - applies only to models VVW6024A and

VVW6026A.

• Press the Start/Pause button (2) to start the program. The light in the Start/Pause button turns o and the indicator light

of Washing (3) switches o.

You can follow the progress of the program using the indicator lights on the control panel. As long as the dishwasher is

washing, rinsing or drying, the indicator light (3) will be on. The dishwasher remains silent for about 40-50 minutes whilst

drying. When the indicator light Ready (3) lights up, the program is ﬁnished.

• Switch the dishwasher of with the On/off button (4).

NOTE! You can slightly open the door and wait a few minutes before unloading the dishwasher. The dishes and

cutlery will still be very hot and may break as a result of the heat. Moreover, the dishes dry better when allowed

to stand for a few minutes.

SWITCHING THE DISHWASHER ON AND OFF

ENDING OR CHANGING A PROGRAM

If you would like to end a program of change a program while a washing cycle is already running.

• Press the Start/Pause button (2). The light in the Start/Pause button will ﬂash indicating the program is paused.

• Turn the program selector knob (1) to the setting ● (Reset).

• Press the Start/Pause button (2) to cancel the program.

The dishwasher will discharge the water in it for nearly 30 seconds.

• As soon as the program has ended, the indicator light Ready (3) will light up.

• Switch the dishwasher o with the On/off button (4) or select another program using the program selector knob (1)

and switch the dishwasher on again.

Model VVW6022A

Model VVW6024A

Model VVW6026A