Operation Manual

7 | TROUBLESHOOTING
VVW6022A VVW6024A VVW6026A DESCRIPTION CHECK
FAULTCODE FAULTCODE FAULTCODE
Wash/Dry Ready Start/Pause Washi Rinse Dry Ready Start/Pause Display code
F5
Inadequate water
supply.
• Check whether the tap is fully open
and there nothing blocking the
water mains.
• Close the tap, remove the input
hose and check whether it is
clogged.
• Start the dishwasher again. Contact
the service department of Inventum
when the error remains.
F3
Water supply is not
stopping.
• Close the tap.
• Contact the service department of
Inventum.
F2
The waste water can
not be discharged.
• The water discharge hose is
clogged.
• The filters might be clogged.
• Turn the dishwasher o. Reset the
dishwasher’s program and check
the filters and the discharge hose.
Restart the dishwasher.
• Contact the service department of
Inventum when the error remains.
F8
The water
temperature is not
correct. Heating
defect.
• Contact the service department of
Inventum.
F1
Safety is activated
against water
overflow.
• Turn o the dishwasher and close
the tap.
• Contact the service department of
Inventum.
FE
Faulty electronics. • Contact the service department of
Inventum.
F7
Overheating error. • Contact the service department of
Inventum.
F9
Position of the
distributor error.
• Contact the service department of
Inventum.
F6
Faulty heat sensor. • Contact the service department of
Inventum.
50