Operation Manual
18
MESSAGES
The
symbol will appear in the upper part of the
screen to indicate that you have received a message.
This usually noties you when a software update is
available.
VIDEOTEXT/TELETEXT
If videotext or teletext information is available on the
current channel, the
symbol will be shown in
the channel information or EPG. You can press the
key on the remote control to display the teletext
information. Use the numeric keys 0-9, on the remote
control, to enter a three-digit page number if available.
AUDIO AND SUBTITLES LANGUAGE
Some TV broadcasters provide several audio channels
or subtitles information, carrying commentary in various
European languages, to accompany the TV image.
Press the ’’Audio/Subtitles” key on your remote control
to display all available audio channel options. Use
the directional keys on the remote control to make a
selection.
STANDBY MODE
You can put the receiver in standby mode to reduce the
power consumption while the unit is not in use. The
standby mode turns off some parts of the receiver, but
does not fully turn off the receiver, allowing a very quick
start-up when the unit is turned on. When the receiver
is in standby mode, the standby LED indication will be
shown on the front panel.