Operation Manual
20
Digital Audio Out
Use this option to specify desired audio format on the digital audio connectors (SPDIF, L/R). This option is valid
for both audio outputs (coaxial and optical).
TIME / DATE
Use this menu to set the time and date.
Automatic Time Update
If the “Automatic Time Update” is set to “On”, the
receiver will receive the time and date automatically
from the broadcasted signal.
Note: Some networks may transmit an incorrect time or
date information.
Date
Use this option to manually set the date.
Local Time
Use this option to manually set the time.
Time Zone
The DVB standard broadcast time and date is by default the GMT time zone. In order to display the local time
correctly, you must set the local time zone.
Note: If daylight savings is enabled then the receiver is changing automatically the time under the following
conditions (valid for Europe with no time limit).
summer times begins and ends at 1:00 am universal time (Greenwich mean time)•
it begins the last Sunday in March•
it ends the last Sunday in October.•
This is done in disregard of DVB broadcasted information.
DEFAULT SETTINGS
Use this option to reset the receiver to default settings.
This may be necessary when the receiver is wrongly
congured. There are three kinds of default settings:
“Factory defaults”, “Settings only” and “Preprogrammed
Channel Lists”.
Factory Defaults
Press the “OK” key and conrm with the “Green”
function key, if you want to reset the unit to the “Factory
default” settings.
Note: Using this option will delete all data stored in the
channel lists, and favourite lists.
After factory default, a “Quick Start Guide” menu will be
opened. Please refer to the Quick Start Guide section of
this user manual to congure your receiver.
Settings only
Use this option to reset only the user preferences and settings, such as time and date. The channel lists remain
unchanged.
Note: If the menu is not displayed clearly or is in black and white, after changing the settings, it is because
the Video output mode was changed when you reset the unit to default settings. To correct this problem go to
chapter Audio/Video Settings.
Preprogrammed Channel Lists
Use this option to reset your TV channel lists to the receiver’s preprogrammed default program lists.