User manual

13
En
TP list modification
of existing satellite entries
Home » Sat meter
Choose the desired satellite at “ Select satellite ”
and tap on the icon with the pencil to edit the
predefined TP list for this satellite, see Figure 17:
TP list of existing satellite.
Figure 17: TP list of existing satellite
Tap on the left red circle to delete a TP entry. By
tapping and hold on the right three stripes of a TP
entry you can change the order of the TP list by
shifting the selected TP up or down.
By tapping on the round arrow with an x in the
center the application will reset the TP list to
factory defaults.
Tap on “ Save ” at the bottom to save the data
and to go one screen backwards.
By tapping on the white cross “ + ” (top right) a
new transponder entry with random data will be
created and placed at the top of the list.
Tap on a TP entry to edit the TP data for the TP
frequency, polarization, symbol rate and DVB
system, see Figure 16 Custom satellite, edit TP.
Tap on “
Save ” at the bottom to save the data
Tap on a TP entry to edit the TP data for the TP
frequency, polarization, symbol rate and DVB
system, see Figure 16: Custom satellite, edit TP.
Figure 16: Custom satellite, edit TP