User manual

18
Signal constellation
Home » Sat meter » “signal bars” » IQ
This screen displays the constellation diagram of
the chosen TP to allow you to analyze the signal
quality and further optimize your installation.
Figure 25: IQ measurement
Tap on “ IQ ” in screen Figure 22: Signal to
see the IQ constellation diagram of the selected
transponder.
With the slider beneath the IQ measurement
window you can choose the quantity of IQ
constellation points.
Install & Report
Home » Install & report
The Install & Report function allows you to record
the signal quality of your installation and generate
an installation report including name of installer,
TP signal parameters, location data, inventory list
and photo(s) of the installation.
After you tapped on
Home » Install & Report
you will see the screen as depicted in Figure
26: Installation. If required same actions can
be taken as described on page 11: Setup of
a LNB for Sat meter and page 12: Custom
satellite for Sat meter and page 13: TP list
modification of existing satellite entries and
page 14: Custom TP lists.
Figure 26: Installation
After the desired satellite or a TP list have been
chosen, tap on “ Start ” to scan the TPs to receive
the signal values for level and quality for the
report.