User manual

26
Unicable II™ toolbox
Home » Unicable II™ toolbox
Unicable II™ configuration
with LNB
Home » Unicable II™ toolbox » upper
rectangle
At this section you can read and edit the
configuration of connected Unicable II™ LNB
or MSW devices. Scope and possible changes
depend on connected device. Find also
further information on page 33: Unicable II™
Configuration Editor.
You can see the entry screen in Figure 40:
Unicable II™ Configuration, LNB.
Figure 40: Unicable II™ Configuration, LNB
Tap on the product image to access the
configuration, to get diagnosis information or
to reset to factory defaults the connected LNB or
Multiswitch device.
For example, a screen as depicted in Figure 41:
Unicable II™ Connected Device, LNB will be
displayed.
Figure 41: Unicable II™ Connected Device, LNB
Tap on “ Configuration ” to read the configura-
tion of the connected device.