User manual

27
En
When the download of the configuration data
is completed, a screen as depicted in Figure 42:
Configuration, LNB will be displayed.
Figure 42: Configuration, LNB
You can see the operating mode of the device
and further down a list of configured UB’s with
assigned Unicable protocol type(s), UB frequency
and bandwidth.
Tap on “
Mode ” to change the operating mode
of the LNB. For an Unicable II™ LNB either
“ Dynamic ” or “ Static ” mode. See Figure 43:
Mode LNB.
Figure 43: Mode LNB
Tap on the desired “
Mode ” and then tap on
“
Save Configuration ” to save changes.
By tapping on “
Commit changes ” the
configuration will be uploaded to the connected
device.