User manual

29
En
Unicable II™ Configuration
with Multiswitch
Home » Unicable II™ toolbox
When an Unicable II™ Multiswitch is connected
to the SatPal™ Controller, the screen as in Figure
46: Unicable II™ Configuration, MSW will be
displayed.
Figure 46: Unicable II™ Configuration, MSW
Tap on the product image to access the
configuration or diagnosis information of the
connected Multiswitch device.
A screen as depicted in Figure 47: Unicable II™
Connected Device, MSW will be displayed.
Figure 47: Unicable II™
Connected Device, MSW
Tap on “ Configuration ” in order to read the
configuration from the connected Multiswitch
device.