User manual

32
Unicable II™ diagnostic,
Spectrum
Home » Unicable II™ toolbox »
“upper rectangle” » Diagnostic » Spectrum
”
Tap on “
Spectrum ” to display in real time the
spectrum at the input of the connected LNB or
Multiswitch Figure 52: Spectrum diagnoses.
Figure 52: Spectrum diagnoses
To change the capture parameters, tap on
“
Change ” on the spectrum display. You will see
changeable parameters as depicted in Figure 53:
Spectrum Capture Parameter.
Figure 53: Spectrum Capture Parameter
Tap on “ Apply ” to apply settings.