User manual

33
En
Unicable II™ ODU usage
information
Home » Unicable II™ toolbox » “upper
rectangle” » Diagnostic » Usage Information
Tap on “ Usage information ” to display
information, depending on the connected model,
about the device temperature, number of resets
and activated UB’s over a time axis, see Figure
54: Usage information as example.
Figure 54: Usage information
Unicable II™ Reset to
Factory Defaults
Home » Unicable II™ toolbox »
“upper rectangle” » Reset to Factory Defaults
Tap on “ Reset to Factory Defaults ” button field,
to reset the parameters of the connected device
to their factory default values. Afterwards tap on
“ Yes ” to confirm reset to factory default values.
Unicable II™ Configuration
Editor
Home » Unicable II™ toolbox »
“lower rectangle”» Configuration Editor
At this section you can create your own
Unicable II™ configuration files for Unicable II™
capable devices. The configuration files can be
stored locally or in the cloud on Dropbox, can
be uploaded to the SatPal™ Controller or to an
Unicable II™ connected device.
To create, or modify configuration files only
neither a connection to the SatPal™ Controller,
an Unicable II™ device or a network is required.
To upload configurations to the SatPal™
Controller a Bluetooth connection to the SatPal™
Controller is required. For an upload to any
Unicable II™ device, the device needs to have a
connection to the application over the SatPal™
Controller.
To upload configurations to your Dropbox a
network (internet) connection and a Dropbox
account is required.