Use Instructions

28 | Operating instructions

4. Press the canister release button on top of the canister

to release and remove the used canister.

7. Open the clamp on the dressing tubing and make sure

the canister tubing is unclamped.

8. To resume the therapy click on the Pause screen.

The pump motor will start to work, the Main screen will appear and the light indicator

should switch from yellow to green when the target level of negative pressure is reached.

9. Discard the used canister in accordance with local environmental guidelines.

For instructions, refer to chapter “Disposal” on page 50.

5. Unpack a new sterile canister and attach it to the pump.

For instructions, refer to chapter “Attach canister to the pump” on page 23.

6. Connect canister tubing to the dressing tubing.

For instructions, refer to chapter “Connect canister tubing to dressing tubing” on page 24.