Operation Manual

CHRONOGRAPHS WITH BIG DATE AND DAY
Basic Function . Start/Stop/Reset
Before using the chronograph functions, please ensure that the crown is
in position 0 and the 4 chronograph hands are precisely at zero position
following activation of push-button B. Should this not be the case, the
positions of the hands must be adjusted.
1. Start: Press push-button A.
2. Stop: Press push-button A again and read the 3 chronograph counters.
3. Reset: Press push-button B. The three chronograph hands will be reset
to their zero positions.
CHRONO
GRAPHS WITH BIG DATE AND DAY
Setting the Time, Day and Date
1. Pull out the crown to position 1.
2. Turn the crown until you reach the correct date. If you change the date
between 9:00pm and 12:00pm, it must be set to the following day as
dates set between these hours do not automatically change at midnight.
3. Pull out the crown to position 2.
4. Turn the crown clockwise until you reach the correct time.
5. Turn the crown counterclockwise until you reach the correct day.
6.
Push the crown back into position 0. The watch will begin running again.
34
35