Operation Manual

CHRONOGRAPHS WITH DATE, DAY AND MONTH
Display Elements
Control Buttons
CHRONO
GRAPHS WITH DATE, DAY AND MONTH
Setting the Time, Date, Day and Month
1. Pull out the crown to position 1. The watch stops.
2. Turn the crown until you reach the correct time.
3. Push the crown back into position 0. To set the time to the exact
second, it must be pushed back in at the exact second. Please observe
AM/PM clock rythm. The watch will begin running again.
4. Press the corrector C until you reach the correct date. If you change
the date between 9:00pm and 12:00pm, it must be set to the following
day as dates set between these hours do not automatically change at
midnight.
5. Press the corrector D until you reach the correct day.
6. Press the corrector E until you reach the correct month.
42
43