User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 Wizard & Main Interface
- 4 Camera Management
- 5 Live Preview Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Compatible Device List
Device Management
NVR User Manual
79
www.invidtech.com
Multiple Address Setting:
If “Multiple Address Setting” is selected, the IP addresses of the two Ethernet ports should be
set respectively. Refer to the picture as shown below.
Check “Obtain an IP address automatically” and “Obtain DNS automatically” to get the IP
address and DNS automatically, or manually input the IP address, subnet mask, gateway and
DNS; select one Ethernet port as the default route and then click “Apply” button to save the
settings.