User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 Wizard & Main Interface
- 4 Camera Management
- 5 Live Preview Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Compatible Device List
Device Management
NVR User Manual
88
www.invidtech.com
11.5 Backup and Restore
You can back up the configuration file of the NVR by exporting the file to other storage
devices; you can recover the configuration to other NVRs which are of the same model with
the NVR by importing the configuration file to other NVRs for time saving.
Insert the USB storage device into the USB interface of the NVR and then click
StartSettingsSystemMaintenanceBackup and Restore to go to the interface.
Backup
Select the USB device in “Device Name” option; go to the path where you want to store the
configuration backup file and then click “Backup” button; finally click “OK” button in the
popup window.
Recover
Select the USB device in “Device Name” option; find the configuration backup file and then
click “Recover” button; finally click “OK” button in the popup window.
11.6 View Log
Click StartSettingsSystemMaintenanceView Log to go to the log view interface.
Select the log main type, click to set start time and end time and then click “Search”
button. The searched log files will be displayed in the list.
Note: The file system of the USB mobile device which is used for upgrading, backing up and restoring
should be FAT32 format.