Instructions / Assembly

Easy to install

• Made of galvanized steel with a lasting powder coat

paint nish (Black)

• Blends with roof line for less visibility

• 6” x 36” - Fits all standard “K” style gutters

• Fine mesh pattern blocks the smallest debris

• Available in 25 count & 50 count cartons

Part No. 6360

• Pre-notched end allows for overlapping

• Works with spike/ferrule and all hidden hangers

Problem

Solution

Debris accumulates behind

curved guards (hinged)

Hinge flips up allowing

gutter to clog with debris

Lock-In slides

under shingles

Install Lock-In gutter guards to keep leaves and debris out of the gutter system.

Slides under the shingles eliminating debris accumulation.

Innovative Drainage Products

www.amerimax.com

Metal Lock-In

Gutter Guard

HEAVY DUTY GRADE

PAGE 1
Metal Lock-In Gutter Guard Easy to install HEAVY DUTY GRADE Part No. 6360 Install Lock-In gutter guards to keep leaves and debris out of the gutter system. Slides under the shingles eliminating debris accumulation.
PAGE 2
Metal Lock-In Gutter Guard Easy Installation Instructions CAUTION: Wear safety glasses and leather gloves while installing this product. Always exercise appropriate care when working from a ladder. Follow all tool and ladder manufacturer’s instructions and safety recommendations. Tools & Safety Equipment Needed: Safety glasses, leather gloves, tin snips, flathead screwdriver and a ladder. Make sure you clean your gutters and downspouts before installation of the Lock-In Gutter Guard.
PAGE 3
Starting at one end of the gutter, install the gutter guard by slightly lifting the shingles and sliding the gutter guard under the shingle (A). If the starter row of shingles are fastened to the roof deck slide the guard between the layers. (Note: Check your local building codes for any special installation requirements). Pull the front edge forward to engage with the lip of the gutter. If necessary a flathead screwdriver can be used to help pull the guard forward (B).