Instructions / Assembly

Easy Installation Instructions
CAUTION: Wear safety glasses and leather gloves while installing this product. Always
exercise appropriate care when working from a ladder. Follow all tool and ladder manufacturer’s
instructions and safety recommendations.
Downspout
R
Free owing water from your
downspout extension
Fits standard 4 in., 5 in. and 6 in. gutters.
Before installing the rst gutter guard, notch the back edge (A)
and the front edge (B). The front edge may already be pre-notched
depending on the direction you start your installation. Next, bend
the end section down to create an end cap. This will help prevent
birds and other animals from nesting in the gutter.
Using the cleaning
scoop (with exible conforming tip) to
make cleaning easy.
Make sure you clean your gutters and downspouts before installation of the Lock-In Gutter
Guard. You should ush the entire gutter system with a hose, making sure water is owing
freely from the bottom of the downspout without any water backing up in the gutter.
Tools & Safety Equipment Needed:
Safety glasses, leather gloves, tin snips, athead screwdriver and a ladder.
(A)
(B)
End Cap
Innovative Drainage Products
Metal Lock-In
Gutter Guard