User Manual

ManualsBrandsInvivo ManualsElectronicsWireless ECG for Patient Monitoring in MRI Environments

Table Of Contents

Manufacturer
Identification and Publication Details
Regulatory
Explanation of Symbols
Conventions
- System Conventions
- Document Conventions
Important Information
- About
- Intended Use
- Compatibility
- Indications for Use
- Contra-indications
- Training
- Safety
  - Equipment Classification (According to IEC 60601-1)
- Electromagnetic Compatibility (EMC)
  - Radios
- Using Batteries Safely
- Examining the Shipment
  - Disposing of the Packaging
- Initial Setup
  - Installing and Connecting Cart Batteries
  - Attaching the SpO2 Probe to the wSpO2 Module
- Rear Panel Connections
  - Connecting AC Mains Power
- Understanding Battery Operations
- Understanding Wireless Network Operations
  - Setting the Wireless Network Channel of the Cart
  - Setting the Wireless Network Channel of the wECG and wSpO2 Modules
- Advanced User Options
  - Expression Information Portal (Model IP5)
  - Additional Options
- Accessory List
System Overview
- System Parameters
- System Components
  - Use Model
- Hardware Features
- wECG and wSpO2 Modules
  - wECG Module
    - wECG Module Indicators
  - wSpO2 Module
    - wSpO2 Module Indicators
- Storing Modules and Accessories
- Displayed Information and Controls
- Navigation and Operation
- Modes of Operation
Getting Started
- Defibrillator and Electrosurgical Use
- Positioning the MR400
- Operating the MR400
  - System Power-up and Communications Verification
    - Cart Power-down
    - Wireless Module Power-down
- Monitor Initialization
- Viewing the Displayed Information
- Default Settings
  - Default Setting Indications
  - User Settings
- Initial Alarm Indications
- Selecting the Patient Type
- Setup Menus
  - Monitor Setup Menu
Alarms
- Alarm Safety Information
- Visual Alarm Indications
- Audible Alarm Indications
- Managing Alarm Functions
- Alarms Menu
- Adjustable Alarm Limit Ranges
- Alarm Limit Factory Defaults
- Measurement Limits and Over / Under Values
- Listing of Alarms
  - Patient and INOP Alarms
  - Technical (INOP) Alarms and Other Status Flags
Monitoring ECG
- ECG Monitoring Considerations for the MR Environment
- wECG Module and ECG Lead Cable
- Quadtrode Electrodes
- ECG Waveforms and VS Box
  - Changing the Heart Rate Alarm Limits
- ECG Menu
Monitoring SPO2
- wSpO2 Module, SpO2 Probe and SpO2 Attachment
- Patient Preparation for SpO2 Monitoring
- SPO2 Waveform and VS Box
- SPO2 Menu
Monitoring CO2 (LoFlo Option)
- MR400 Preparation for CO2 Monitoring
- Operation and Use
- Patient Preparation for CO2 Monitoring
- CO2 Waveform and VS Box
  - Changing the CO2 and CO2 (RESP) Alarm Limits
  - Changing the Unit of Measure
- CO2 Menu
Monitoring Invasive Blood Pressure
- Indications and Contraindications
  - Adult and Pediatric Patients
  - Neonatal Patients
- Patient Preparation for IBP Monitoring
- Transducer Component, Connection, and Feature Locations
- MR 400 Preparation for IBP Monitoring
  - Adult and Pediatric Patients: Expression MR IBP DPT Kit, A/P (REF 989803194631)
  - Neonatal Patients: Expression MR IBP DPT Kit, I/N (REF 989803194641)
- Zeroing the Pressure Transducer
- P1 (and P2) Menu
Monitoring Agents and Gases (AGENT Option)
- MR400 Preparation for AGENT Monitoring
- Operation and Use
- CO2 Low Flow and Occlusion Conditions
- Selecting AGENT Accessories
- AGENT Tubing Preparation
  - Pre-Use System Checks
  - Applying the Sampling Line to the Patient
- Water Trap Replacement
- AGENT and GAS VS Boxes
- MAC Window
- CO2 Waveform and VS Box
  - Changing the CO2 and CO2 (RESP) Alarm Limits
  - Changing the Unit of Measure
- CO2 Menu
Monitoring RESP
- Patient Preparation for RESP Monitoring
  - Monitoring Respiration using CO2
  - Monitoring Respiration using the Bellows
- Bellows Preparation
- Respiration VS Box
  - Changing the CO2 (RESP) Alarm Limits
- RESP Menu
Monitoring Temperature
- General Usage Precautions
- Initial Use
- Connecting and Disconnecting the Sensor
- Temperature Measurements
  - Making Surface Temperature Measurements
  - Making Body Temperature Measurements
    - Placing the Temperature Sensor in a Jacket
    - Placing the Temperature Sensor at the Body Site
- Post-Measurement Processing
- Accuracy Check
- TEMP VS Box
  - Changing the TEMP Alarm Limits
  - Changing the Unit of Measure
- TEMP Menu
  - Units
Monitoring NIBP
- Patient Preparation for NIBP Monitoring
  - Selecting the NIBP Cuff
  - Positioning the NIBP Cuff
- Connecting the NIBP Cuff
- NIBP VS Box
- NIBP Menu
Trend Data and Printing
- Trending Functions
  - Viewing Tabular Trend Data
  - Tabular Trends Menu
- Printing Functions
- Printer Menu
Maintenance and Troubleshooting
- General Cleaning Guidelines
- Removing all Power to the MR400
  - Restoring all Power to the MR400
- Removing Power from the Wireless Modules
  - Restoring Power to the Wireless Modules
- User Routine-Checks and Planned Maintenance
- Cleaning, Disinfection, and Damage Inspection
  - Cleaning, Disinfecting, and Inspecting the Accessories
  - Cleaning, Disinfecting, and Inspecting MR400 and Wireless Modules
- Sterilization
- Testing Alarms
- Testing a Dropped Wireless Module
- Verification Testing
- Anesthetic Oxygen (O2) Sensor Depletion
  - Replacing the O2 Sensor
- Updating Software
- Calibrating the Touch Screen
- Troubleshooting
- Repair
- Environmental Requirements
- Passing the Product on to another User
  - Packaging the MR400
- Final Disposal of the Product
  - Disposal of the MR400 and Accessories
  - Fitting, Removing and Disposing of Batteries
Specifications
- General
- Displayed Information
- ECG
- Pulse Oximeter
- CO2 (Optional LoFlo)
- Invasive Blood Pressure (Optional)
- AGENT (Optional)
- Bellows Respiration
- Temperature (Optional)
- Non-Invasive Blood Pressure
- Gating Outputs
Warranty
- Warranty Statement
Regulatory Information
- European Union
  - Declaration of Conformity
  - Authorized Representative
- Australia
Gating Feature
- MR400 Preparation for Gating
  - Gating Connector Pin-outs
- Using the Gating Feature
  - Using ECG Gating
  - Using SPO2 Gating
Guidelines and References
- Guidelines for the Prevention of Excessive Heating and Burns Associated with Magnetic Resonance Procedures
- References

6 Contents

The IBP transducer must not be mounted to the patient, or patient burn may result. . . 8-8

VI. Fast Flushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

VII. Checking for Leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

VIII. In the MR Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Neonatal Patients: Expression MR IBP DPT Kit, I/N (REF 989803194641). . . . . . . . . . . . . 8-10

I. Connecting the Reusable Cable to the MR400. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

II. Kit Set Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

III. Purging Air from the Monitoring Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12

IV. Zeroing, Leveling and Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12

V. Connecting the Monitoring Kit to the Patient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14

VI. Checking for Leaks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

VII. In the MR Room. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

Zeroing the Pressure Transducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16

Systolic/Diastolic Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17

Mean Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18

Changing the P1 (or P2) Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19

Changing the P1 (or P2) Waveform Amplitude. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19

Changing the P1 (or P2) Alarm Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20

Changing the Unit of Measure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22

P1 (and P2) Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22

Zero Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24

Set Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24

Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25

HR Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26

Grids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26

Grids Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-27

Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-28

Chapter 9: Monitoring Agents and Gases (AGENT Option)

MR400 Preparation for AGENT Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Operation and Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Warm-Up Period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2

Zero Reference Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2

Breath Rate Distortion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

CO2 Low Flow and Occlusion Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

Selecting AGENT Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5

AGENT Tubing Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5

Pre-Use System Checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8

Applying the Sampling Line to the Patient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

Water Trap Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-13

AGENT and GAS VS Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-14

Multiple (Mixed) Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15

AGENT VS Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16

GAS VS Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-17

Changing the AGENT and GAS Alarm Limits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-17

MAC Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-20

CO2 Waveform and VS Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-22

Changing the CO2 and CO2 (RESP) Alarm Limits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-23

Changing the Unit of Measure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-26