User's Manual

Table Of Contents

989803173791 Rev 0.6Chapter2:GettingStarted 27

NOTE

Anypartoftheabovesequencenotcompleted willcausethemoduletoreverttothenetwork

previouslyset30secondsafterthenetworkselectionbuttonwaslastreleased.

Toassignthewirelessmoduletothemonitor’snetworkfollowthesesteps:

Step Action

1 Identifythenetworksettingofthemonitor,asindicatedbythe

networkbutton.



2 Removethemodulebatteryfromthemodule;seeModuleBattery,

above.

3Installthe

modulebattery.Thenetworkiconswillflash brieflyand

thenthecurrentnetworkiconwillilluminate(forexample,

NetworkCintheillustrationbelow).

NOTE

Dependinguponyourmodule,thenetworkiconsmayhaveletteror

numericdesignators;and,thoughtheseexamplesshowletter

designators,theprocessisthesamefornumericdesignators.

Network button