User's Manual

3-13

Figure 3-12. The SOUND ADJUST Menu

The following is a description of this menu's options:

(a) ALARMS. Selecting this menu option will turn the alarm sound ON

and OFF. When turned off, an “X” appears in the bell symbol on the

screen, and on the one in the menu option area, indicating that the

alarm sound has been disabled. This menu option is identical to, and

interactive with, the SOUND menu option in the ALARMS Menu.

(b) HR TONE SRCE. Selecting this menu option will select the heart rate

tone source. The options are OFF (default), QRS and SPO2. When

source is QRS, the tone sounds at the detection of QRS from the ECG

parameter. When source is SpO2, the tone sounds at the detection of the

pulse from the Pulse Oximeter parameter.

The pulse tone is modulated by the SpO2 value. The lower the

SpO2 value the lower the pitch of the pulse tone will be.

This menu option is identical to, and interactive with, the HR

TONE SOURCE Menu option in the ECG and SPO2 Menus.

of volume for the Alarm Tone. The range is 1 - 10 (default is 4).

The 3160 Patient Monitoring System generates the Alarm Tone

(while in the VOLUME Menu) to provide the user with an audible

indication of the current volume-level setting.

(d) PULSE VOLUME. Selecting this menu option allows the selection of

volume for the pulse tone. The range is 1 - 10 (default is 4).

The 3160 Patient Monitoring System generates the pulse tone

(while in the VOLUME Menu) to provide the user with an audible

indication of the current volume-level setting.

(e) CLICK TONE. Selecting this menu option turns the click tone

generation of the device ON and OFF without affecting the adjusted

volume for the click tone.

(f) CLICK VOLUME. Selecting this menu option allows the selection of

volume for the click tone. The range is 1 - 10 (default is 4).

The 3160 Patient Monitor generates the click tone (while in the

VOLUME Menu) to provide the user with an audible indication of

the current volume-level setting.

(g) RETURN. Selecting this menu option returns the monitor to the

Normal Screen.