Instruction Manual
Table Of Contents
- Glossary of terms
- 1. This manual
- 2. Safety
- 3. Get to know SBV System Series
- 4. Functioning principles
- 4.1 Sensor functioning principles
- 4.2 Detection fields
- 4.3 Safety working modes and safety functions
- 4.4 Safety working mode: Both (default)
- 4.5 Safety working mode: Always access detection
- 4.6 Safety working mode: Always restart prevention
- 4.7 Restart prevention function: static object detection option
- 4.8 Features of the restart prevention function
- 4.9 Muting
- 4.10 Anti-tampering functions: anti-rotation around axes
- 4.11 Anti-tampering functions: anti-masking
- 5. Sensor position
- 6. Installation and use procedures
- 7. Maintenance and troubleshooting
- 8. Technical references
- 9. Appendix
12
SBV System Series| Instruction manual v1.2 DEC 2021 |SAF-UM-SBVBus-en-v1.2|© 2021 Inxpect SpA
3. Get to know SBV System Series
Contents
This section includes the following topics:
3.1 SBV System Series 12
3.2 SBV System Series control units 14
3.3 SBV-01 sensors 20
3.4 Inxpect Safety application 21
3.5 Fieldbus communication 23
3.6 Modbus communication 24
3.7 System configuration 25
Product label description
The following table describes the information contained in the product label:
Part Description
SID Sensor ID
DC "yy/ww" : year and week of the product manufacture
SRE Safety Radar Equipment
Model Product model (e.g. SBV-01, ISC-B01)
Type Product variant, used for commercial purposes only
S/N Serial number
3.1 SBV System Series
3.1.1 Definition
SBV System Series is an active protection radar system that monitors the dangerous areas of machinery.
3.1.2 Special features
Some of the special features of this protection system are the following:
l detection of current distance and angle of the targets detected by each sensor
l up to four safe detection fields to define different behaviors of the machines
l programmable coverage angle for each detection field
l rotation on three axes during installation to allow better coverage of detection areas
l Ethernet safety Fieldbus to safely communicate with the PLC of the machinery (if available)
l possibility to switch dynamically between different preset configurations (max 32 through Fieldbus, if
available, and max 4 with digital inputs) to adapt to the surrounding reality
l muting on the entire system or only on some sensors
l immunity to dust and smoke
l reduction of undesired alarms caused by the presence of water or processing waste
l communication and data exchange through Modbus (if available)