Instruction Manual
Table Of Contents
- Glossary of terms
- 1. This manual
- 2. Safety
- 3. Get to know SBV System Series
- 4. Functioning principles
- 4.1 Sensor functioning principles
- 4.2 Detection fields
- 4.3 Safety working modes and safety functions
- 4.4 Safety working mode: Both (default)
- 4.5 Safety working mode: Always access detection
- 4.6 Safety working mode: Always restart prevention
- 4.7 Restart prevention function: static object detection option
- 4.8 Features of the restart prevention function
- 4.9 Muting
- 4.10 Anti-tampering functions: anti-rotation around axes
- 4.11 Anti-tampering functions: anti-masking
- 5. Sensor position
- 6. Installation and use procedures
- 7. Maintenance and troubleshooting
- 8. Technical references
- 9. Appendix
3.2.3 Structures
ISC-B01
ISC-02
ISC-03
Part Description Control unit
A I/O terminal block ISC-B01, ISC-02, ISC-03
B System status LEDs ISC-B01, ISC-02, ISC-03
C Network parameter reset button ISC-B01, ISC-02, ISC-03
D Reserved for internal use. Output reset button ISC-B01, ISC-02, ISC-03
E Micro-USB port for connecting the PC and
communicating with the Inxpect Safety application
ISC-B01, ISC-02, ISC-03
F Micro-USB port (reserved) ISC-B01
G Fieldbus status LEDs
See "Fieldbus status LEDs" on the next page
ISC-B01
H Ethernet port with LEDs for connecting the PC,
communicating with the Inxpect Safety
application, and for Modbus communication
ISC-B01, ISC-02
I Power supply terminal block ISC-B01, ISC-02, ISC-03
J Power supply LEDs (steady green) ISC-B01, ISC-02, ISC-03
K CAN bus terminal block for connecting the first
sensor
ISC-B01, ISC-02, ISC-03
L DIP switch to turn on/off the bus termination
resistance:
l On (top position, default) =resistance included
l Off (bottom position)= resistance excluded
ISC-B01, ISC-02, ISC-03
3. Get to know SBV System Series
SBV System Series| Instruction manual v1.2 DEC 2021|SAF-UM-SBVBus-en-v1.2|© 2021 Inxpect SpA
15