Instruction Manual

Table Of Contents

Part Description

D Mounting bracket

E Tamper-proof screw to position the sensor at a specific angle around y-axis (pan 10° steps)

F Connectors for connecting the sensors in a chain and to the

G Tamper-proof screw to position the sensor at a specific angle around z-axis (roll 10° steps)

3.3.4 Status LED

Status Meaning

Steady blue Sensor is working. No motion detected.

Flashing blue Sensor is detecting motion. Not available if the sensor is in muting.

Purple Firmware update conditions. See "Sensor LED" on page66

Red Error conditions. See "Sensor LED" on page66

3.4 Inxpect Safety application

3.4.1 Functions

The application permits the following main functions to be performed:

l Configure the system.

l Create the configuration report.

l Check system functioning.

l Download system log.

WARNING! The Inxpect Safety application is designed only for the system configuration and for its

first validation. If the application is used for monitoring the system continuously during the regular

operation of the machinery, the system response time cannot be guaranteed. Use the application

only for the functions for which it has been designed.

3.4.2 Inxpect Safety application usage

To use the application, the control unit must be connected to a computer with a data micro-USB cable or, if the

Ethernet port is available, an Ethernet cable. The USB cable allows to configure the system locally, whereas the

Ethernet cable allows to do it remotely.

The Ethernet communication between the control unit and the Inxpect Safety application is secured by the most

advanced security protocols (TLS).

3. Get to know SBV System Series