Instruction Manual
Table Of Contents
- Glossary of terms
- 1. This manual
- 2. Safety
- 3. Get to know SBV System Series
- 4. Functioning principles
- 4.1 Sensor functioning principles
- 4.2 Detection fields
- 4.3 Safety working modes and safety functions
- 4.4 Safety working mode: Both (default)
- 4.5 Safety working mode: Always access detection
- 4.6 Safety working mode: Always restart prevention
- 4.7 Restart prevention function: static object detection option
- 4.8 Features of the restart prevention function
- 4.9 Muting
- 4.10 Anti-tampering functions: anti-rotation around axes
- 4.11 Anti-tampering functions: anti-masking
- 5. Sensor position
- 6. Installation and use procedures
- 7. Maintenance and troubleshooting
- 8. Technical references
- 9. Appendix
5.2 Sensor field of view
5.2.1 Types of field of view
During the configuration phase, for each sensor it is possible to select the angular coverage of each field in a
range from 10° to 100°. See "Angular coverage" on page28.
The actual detection field of the sensor also depends on the sensor installation height and inclination. See
"Calculation of range of distances" on page46.
5.2.2 Areas and dimensions of the field of view
The sensor field of view is composed of two areas:
l detection field [A]:where detection of objects similar to humans in any position is guaranteed.
l tolerance area [B]:where the actual detection of a moving object/person depends on the characteristics of
the object itself (see "Factors that influence the reflected signal" on page27).
Dimensions for the access detection function
Note: the tolerance area dimensions described are related to the detection of humans.
The tolerance area is 20° greater than the angular coverage set.
Top view
Side view
5. Sensor position
SBV System Series| Instruction manual v1.2 DEC 2021|SAF-UM-SBVBus-en-v1.2|© 2021 Inxpect SpA
43