Instruction Manual
Table Of Contents
- Glossary of terms
- 1. This manual
- 2. Safety
- 3. Get to know SBV System Series
- 4. Functioning principles
- 4.1 Sensor functioning principles
- 4.2 Detection fields
- 4.3 Safety working modes and safety functions
- 4.4 Safety working mode: Both (default)
- 4.5 Safety working mode: Always access detection
- 4.6 Safety working mode: Always restart prevention
- 4.7 Restart prevention function: static object detection option
- 4.8 Features of the restart prevention function
- 4.9 Muting
- 4.10 Anti-tampering functions: anti-rotation around axes
- 4.11 Anti-tampering functions: anti-masking
- 5. Sensor position
- 6. Installation and use procedures
- 7. Maintenance and troubleshooting
- 8. Technical references
- 9. Appendix
Top view with sensor inclination 0°.
5.3 Dangerous area calculation
5.3.1 Introduction
The dangerous area of the machinery to which SBV System Series is applied must be calculated as indicated in
standards ISO 13855:2010. For SBV System Series the fundamental factors for calculation are height (h) and
inclination (α) of the sensor, see "Sensor position" on page42.
5.3.2 Formula
To calculate the depth of the dangerous area (S), use the following formula:
Where:
Variable Description Value
Measurement
unit
K Maximum dangerous area access
speed
1600 mm/s
T Total system stopping time (SBV
System Series + machinery)
0.1 + Machinery stopping time (calculated in
accordance with ISO 13855:2010 standard)
s
C Corrective constant according to
standard ISO 13855:2010
850 mm
Example 1
l Machinery stopping time =0.5 s
T = 0.1 s + 0.5 s = 0.6 s
S =1600 * 0.6 + 850 = 1810 mm
5. Sensor position
SBV System Series| Instruction manual v1.2 DEC 2021|SAF-UM-SBVBus-en-v1.2|© 2021 Inxpect SpA
45