Instruction Manual
Table Of Contents
- Glossary of terms
- 1. This manual
- 2. Safety
- 3. Get to know SBV System Series
- 4. Functioning principles
- 4.1 Sensor functioning principles
- 4.2 Detection fields
- 4.3 Safety working modes and safety functions
- 4.4 Safety working mode: Both (default)
- 4.5 Safety working mode: Always access detection
- 4.6 Safety working mode: Always restart prevention
- 4.7 Restart prevention function: static object detection option
- 4.8 Features of the restart prevention function
- 4.9 Muting
- 4.10 Anti-tampering functions: anti-rotation around axes
- 4.11 Anti-tampering functions: anti-masking
- 5. Sensor position
- 6. Installation and use procedures
- 7. Maintenance and troubleshooting
- 8. Technical references
- 9. Appendix
50
SBV System Series| Instruction manual v1.2 DEC 2021 |SAF-UM-SBVBus-en-v1.2|© 2021 Inxpect SpA
5. Sensor position
5.7.3 Recommendations for positioning the sensor
Below are some recommendations for defining the sensor position:
l height above the ground: minimum 10 cm (3.9 in)
l suggested inclination: minimum 15°
Before installing a sensor facing downwards, make sure there are neither liquids nor radar reflective materials on
the floor.
5.7.4 Position not exposed to precipitation
If the installation position of the sensor is not exposed to precipitation, no special precautions are required.