Instruction Manual
Table Of Contents
- Glossary of terms
- 1. This manual
- 2. Safety
- 3. Get to know SBV System Series
- 4. Functioning principles
- 4.1 Sensor functioning principles
- 4.2 Detection fields
- 4.3 Safety working modes and safety functions
- 4.4 Safety working mode: Both (default)
- 4.5 Safety working mode: Always access detection
- 4.6 Safety working mode: Always restart prevention
- 4.7 Restart prevention function: static object detection option
- 4.8 Features of the restart prevention function
- 4.9 Muting
- 4.10 Anti-tampering functions: anti-rotation around axes
- 4.11 Anti-tampering functions: anti-masking
- 5. Sensor position
- 6. Installation and use procedures
- 7. Maintenance and troubleshooting
- 8. Technical references
- 9. Appendix
92
SBV System Series| Instruction manual v1.2 DEC 2021 |SAF-UM-SBVBus-en-v1.2|© 2021 Inxpect SpA
8. Technical references
Parameter Min Max Default value
Position (for each sensor) X: 0 mm
Y: 0 mm
X: 65000 mm
Y: 65000 mm
Default position of
sensor #1:
X: 1000 mm
Y: 1000 mm
Rotation (for each sensor) 0° 359° 0°
Inclination (for each sensor) -90° 90° 0°
Sensor installation height (for each sensor) 0 mm 10000 mm 0 mm
Detection Distance 1(for each sensor) 0 mm 5000 mm 1000 mm
Detection Distance 2, 3 and 4 (for each
sensor)
0 mm 5000 mm
Note: the sum of all
the detection
distances (for each
sensor) must not
exceed 5000 mm.
0 mm
Angular coverage 10° 100° 100°
Safety working mode (for each detection
field of each sensor)
Both (default), Always access detection,
Always restart prevention
Both (default)
Static object detection (for each detection
field of each sensor)
Enabled, Disabled Disabled
Restart timeout (for each detection field of
each sensor)
100 ms 60000 ms 4000 ms
T
OFF
100 ms 60000 ms 100 ms
Settings > Sensors
Detection field dependency Enabled, Disabled Enabled
Anti-masking Disabled, Low, Medium, High High
Anti-masking distance 0 mm 1000 mm 1000 mm
Anti-rotation around axes Disabled, Enabled Enabled
Anti-rotation around axes - Enable specific
axes - Tilt
Disabled, Enabled Enabled
Anti-rotation around axes - Enable specific
axes -Roll
Disabled, Enabled Enabled
Anti-rotation around axes - Enable specific
axes - Pan
Disabled, Enabled Enabled
Settings > Digital Input-Output
Digital input (for each input) Stop signal, Restart signal, Muting group
“N”, Activate dynamic configuration,
Fieldbus controlled
Not configured
Digital output (for each output) System diagnostic signal, Muting enable
feedback signal, Fieldbus controlled,
Restart Feedback signal, Detection signal
"N"
Not configured
OSSD Pulse width Short (300 μs), Long (2 ms) Short (300 μs)
Settings > Muting
Group for muting (for each sensor) None, Group 1, Group 2, both Group 1
Pulse width (for each Input TYPE) 0 μs (= Period and
Phase shift disabled)
200 μs
2000 μs 0 μs
Period (for each Input TYPE) 200 ms 2000 ms 200 ms
Phase shift (for each Input TYPE) 0.4 ms 1000 ms 0.4 ms
Settings > Restart parameters
Detection field 1, 2, 3, 4 Automatic, Manual, Safe manual Automatic