Product Overview
3-Zone
Expansion Panel
6 Zone Panel
Zone Control Panel
ZP6
The ZP6 is a 6 zone, two-position forced air zone control panel that can be expanded to 12
zones. The panel can be used with single-stage, multi-stage, heat pump and dual fuel equipment
with up to 3 stages of heating and 2 stages of cooling. Slide switch conguration makes setup
quick and easy. A wide range of control options provide ultimate application exibility including
adjustable high/low limits, adjustable high/low balance point, stage timing, capacity control and
priority cooling control.
Features and Benets:
• 6 zones expandable up to 12
• Auto changeover
• Cooling priority or majority wins
• Twenty minute time share option
• LED status indication
• On-board adjustable high and low limits
and balance points
• Staging by zone thermostat or adjustable
stage timer
• Purge cycle option
• For use with 2 or 3 wire dampers
• Competitively priced
Warranty: 10 years
ZP6-EP
This 3-zone expansion panel is
used with the ZP6 zoning panel
to increase the number of zones
to 9 or 12.
Specications:
Construction
Aluminum back plate with mounting holes
Dimensions
13.50” Height x 11.00” Width x 2.00” Depth
Operating Temperature
-40° F to 150° F
Adjustable Limits
High Limit (100° F to 175° F)
Low Limit (40° F to 58° F)
High Balance Point (55° F to 70° F)
Low Balance Point (0° F to 50° F)
Purge Cycle
O or 1 minute
Fan Mode
All zones or by zone thermostat