Manualshelf

Users Manual Part 1

ManualsBrandsio ManualsElectronicsDual band 2X2 Outdoor Access Point (AP) with external antenna
21222324252627282930
2x2 Indoor & Outdoor Access Points Revision: A0-00
26
CONFIDENTIAL
Note: The Reset button of outdoor AP is located below the humidity controller cap. Turn the humidity controller cap
in counter clock wise direction and remove it from the access point. Use an appropriate pointed object to press the
button. It serves two functions:
1. Restart: Press and release the Reset button quickly.
2. Restore to Factory Default Settings: Press and hold the Reset button for more than five seconds.
2. Screws for Mounting bracket
This helps in the attachment of mounting bracket and outdoor
AP in case of pole and wall mounting
3.
Grounding point
The outdoor AP is grounded at this point
4.
Thermal Plate (Heat
Transfer)
It helps in heat transfer from the board environment to
Ambient.