Manualshelf

Users Manual Part 1

ManualsBrandsio ManualsElectronicsDual band 2X2 Outdoor Access Point (AP) with external antenna
31323334353637383940
2x2 Indoor & Outdoor Access Points Revision: A0-00
38
CONFIDENTIAL
10 Thin AP Configuration
The user can configure the network interface of the thin AP and the same is discussed in further section.
10.1 Interfaces
A basic overview of the interface screen is given below:
Figure 18: Basic overview of the interface configuration screen
Follow the steps given below to view/edit the interface configuration:
Table 10: List of actions to view/edit the network configuration
Callout
Name
Description
1.
Thin AP Configuration
Click on “Thin AP Configuration” dropdown
2.
Interfaces
Click on “Interfaces” option
3.
Network/Interface overview
Displays the type of network interface available in the
device. The above figure shows the LAN interface overview
4.
Status
Displays the status of the LAN interface with the respect to
the parameters shown in above figure
5.
Edit
Click on “Edit” option to configure the LAN-interface
settings
The user can click on “edit” option to further modify the following configurations:
1. General setup