Users Manual Part 2

2x2 Indoor & Outdoor Access Points Revision: A0-00
56
CONFIDENTIAL
15.4.2 Upload configuration or backup
Use an existing valid configuration file or device backup file and change the device parameters respectively from
this screen. The user can apply similar configuration to multiple devices or can apply different type of
configurations to various set of devices with minimal of the effort.
A basic overview of the Backup/Flash Firmware screen to upload data and configuration from an external file is
given below:
Figure 33: Basic overview of the backup/flash firmware screen to upload configuration
Follow the steps given below to upload data and configuration from an external file:
Table 25: List of actions to upload configuration from an external file
Callout
Name
Description
1.
System
Click on “System” dropdown in navigation tollbar
2.
Backup/Flash Firmware
Click on “Backup/Flash Firmware” option
3.
Browse/Restore backup
Click on “Browse” option and select the file in your
computer to and restore the backup file or any other valid
configuration file
4.
Restore backup
Click on “Upload archive” option to apply the
configurations from selected file