Manualshelf

Users Manual Part 1

ManualsBrandsio ManualsElectronicsDual band 4X4 lndoor Access Point (AP) with integrated antenna
11121314151617181920
Indoor & Outdoor Access Points Revision: A0-09
20
CONFIDENTIAL
4 Hardware Setup
4.1 System Requireme nts
Before installing the access point, make sure that your system includes the following:
1. 10/100/1000 Mbps local area network device such as a hub or switch.
2. The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the package, or one
like it.
3. We can power up the device through PoE adaptor which should be 803at/af compliant. A 100–240 V, 50–60
Hz AC power source.
4. A web browser to configure the devices.
5. At least 802.11b/g-compliant devices.