Users Manual Part 1

Indoor & Outdoor Access Points Revision: A0-09
24
CONFIDENTIAL
5.2.1 Back View
Back side overview of the indoor AP is given below:
Figure 8: Back side view of the indoor AP
Information displayed in the above figure is detailed in the table below:
Table 3: List of information displayed in the back side view of the indoor AP
Callout
Name
Description
1.
DC Jack
The DC jack is provided to power up the AP with 12 V power
adaptor
2.
Reset
Use an appropriate pointed pin and press the reset button to
restore the AP with default factory settings
3.
LA N + PoE Port
Used for powering up the device via PoE adaptor. This port
can be used to carry data as well (optional)
4.
WAN Combo Port
Used to connect the device with the backhaul network or to
connect to a laptop through an Ethernet cable. One of Ethernet
or SFP can be used at a t ime
5.
SFP
Connects fiber cable with the maximum data transfer rate
capability of 1 Gbps.