Users Manual Part 1

Indoor & Outdoor Access Points Revision: A0-09
25
CONFIDENTIAL
5.3 Dual Band 4x4:4 Outdoor Access Point
5.3.1 Front / Side View
A basic overview of the front/side view of the outdoor AP is given below:
Figure 9: Front/side view of the outdoor AP
Information displayed in the above figure is detailed in the table below:
Table 4: List of information displayed in front/side view of the outdoor AP
Callout
Name
Description
1.
Po wer LED
This LED will blink in Red color to notify the user that device
is powered ON
2.
5GHz LED
This LED will blink in Yellow color when 5GHz wireles s
network interface comes up
3.
2.4GHz LED
This LED will blink in Green color when 2.4GHz wireless
network interface comes up
4.
External antenna connectors
Total 8 n-type antenna connectors are available for ion8e
variant of 4x4:4 outdoor AP. Four on LHS and four on RHS.
5.
LA N + PoE Port
Used for powering up the device via PoE adaptor. This port
can be used to carry data as well (optional)
6.
Combo Port
Used to connect the device with the backhaul network or to
connect to a laptop through an Ethernet cable. One of Ethernet
or SFP can be used at a t time
7.
SFP
Connects fiber cable with the maximum data transfer rate
capability of 1 Gbps.