Manualshelf

Users Manual Part 1

ManualsBrandsio ManualsElectronicsDual band 4X4 lndoor Access Point (AP) with integrated antenna
31323334353637383940
Indoor & Outdoor Access Points Revision: A0-09
32
CONFIDENTIAL
6.2.1 Connect to the Outdoor Access Point
Follow the steps mentioned below and connect to the outdoor AP through GUI:
1. Configure a computer with a 1-domain static IP addres s e.g. 192.168.1. 1 and a s ubnet mas k of 255.255.25 5. 0.
2. For help configuring a static IP address on your computer, check the instructions or online help that came
with that computer.
3. Connect the Ethernet cable to the computer.
4. Connect the other end of the Ethernet cable to the PoE adaptor or combo port of the access point.
a. Connect the other end of the Ethernet cable to the combo port. Use the unused port of PoE adaptor
and connect to the backhaul network
Figure 16: Connect to the network-1
(Or)