Users Manual Part 2

Indoor & Outdoor Access Points Revision: A0-09
62
CONFIDENTIAL
15.5 Reboot
Reboot restarts the device with existing configuration. We can change the firmware when the device is rebooted
with different partitions. Based on the selected partition, the corresponding firmware will be loaded into the device
as working firmware
A basic overview of the Reboot screen is given below:
Figure 44: Basic overview of the reboot screen
Follow the steps given below and reboot the AP:
Table 30: List of actions to reboot the AP
Callout
Name
Description
1.
System
Click on “System” dropdown in navigation tollbar
2.
Reboot
Click on “Reboot” option
3.
Reboot to Current partition
Click on “Reboot to Current partition” option. Device will
boot from current partition, and the firmware version present
in the current partition will be in use
Or
4. Reboot to Alternate partition
Click on “Reboot to alternate partition” option. Device will
boot from alternate partition, and the firmware version
present in the alternate partition will be in use. The firmware
upgrade always happen on alternate partition. Use this
option and reboot to the latest uploaded firmware version.